Lectures

Here are some links to past lectures about Swift for Arduino...

The first talk, launching Swift for Arduino at Swift London...

https://skillsmatter.com/skillscasts/10773-swift-for-arduino-an-experimental-compiler

Here's a lecture about the dimmer switch...

https://skillsmatter.com/skillscasts/12236-home-made-homekit-apple-controlled-dimmer

Demo of the dimmer after the talk...
https://twitter.com/mariosge90/status/1012608724475801600?s=21

Demo of the dimmer in action at home...
https://youtu.be/ybakczc3qIk

Blog piece about the dimmer...
https://medium.com/@carl_the_dev/how-i-accidentally-made-a-dimmer-switch-with-a-raspberry-pi-and-an-arduino-c6251848d629

Comments

Post a Comment

Popular posts from this blog

Halloween LED lights on a plastic trick or treat cauldron

Image
Halloween has past but it wasn’t uneventful. My two year old daughter went trick or treating for the first time and it was all so exciting! When i saw the plastic cauldron she was carrying as a trick or treat bag i had an idea. I could use an arduino to operate red LEDs and make the cauldron flash on and off like little evil eyes. I knew she would love it! Once I drilled the holes and got all the pieces I needed: 2 red LEDs soldered in series with a resistor. I connected those to a breadboard arduino I had spare. (See my blog post on making a breadboard arduino.) You can just use a normal Arduino UNO here instead if you prefer. My reasons are because they're cheaper, and also because a breadboard Arduino uses less power and I wanted this to be battery powered. I'm powering the whole thing with 3 AA batteries in a battery case. Because Maplin has shut down in the UK :((( I will have to wait for the battery holder to be delivered... no more weekend fun popping down t
Read more

All about bootloaders

 BOOTLOADERS *** Some interesting general boot loader facts: The Boot Loader is basically a section at the top of flash memory, how big it is depends on the BOOTSZ1 and BOOTSZ0 bits in the Low Fuse byte. It has the special property that ONLY while the core is running instructions in the bootloader, a special instruction called SPM will function. This function allows writing data to the flash memory. As normal with all flash, you need to erase the page you are writing first, otherwise your write operation will often not function correctly. I think you can change 1 bits to 0 bits but not the other way around, which is true for all flash writing. So the flash erase process always sets a flash memory page to all 0xFF (all 1 bits) The usual way the boot loader runs is if the fuse bit BOOTRST is active (i.e. it reads as a 0!) then when the MCU is reset, it will start execution at the beginning of the bootloader (as defined above). If the bit is not set, it will start execution at 0x0000. But
Read more

code signing, entitlements, bundles, sandboxes, hardened runtime, notarisation, app store security

Some people had mentioned troubles with code signing, i thought a brain dump of my learnings on it might be informative and helpful as I've learned a lot in developing a mac app (the s4a IDE).  Some of these concepts are used in ios too but this post is about mac apps. First up, terminology. Code signing. *** This is a variant of normal PKI (public key infrastructure) signing. A hash is made of the binary you're signing (the actual macho executable file), then encrypted with your private key to make a signature that anyone with your public key can decrypt and verify to check your binary hasn't been altered in any way since you signed it. Code signing could in theory be done with any tool, (many of these concepts are NOT mac/ios only concepts but follow general unix/windows/etc. principles and ideas widely used across industry), but in reality, people on a mac use the built in (to macOS) tool "codesign" which is a command line tool that can create, alter, remove an
Read more